This guide is for informational purposes. Balaji Info Lube is a trademark of its respective owner. Driver download links and procedures may change over time. Always verify with official support for the latest instructions.
This is a power issue. The USB port isn't supplying enough stable voltage. Use a powered USB hub between your computer and the GPS tracker.
under "Ports (COM & LPT)" to identify which Virtual COM Port has been assigned to the GPS receiver (e.g., COM4). Key Features of the Balaji GPS Receiver UIDAI Approved balaji info lube gps tracker 3.0 driver download
Some versions of the GPS Tracker 3.0 include Bluetooth. However, initial configuration and driver installation are still required for firmware updates. Bluetooth is usually for quick parameter changes only.
The device should appear as a /dev/cu.SLAB_USBtoUART or similar entry in your terminal. This guide is for informational purposes
Open the extracted folder and look for an installer.exe or setup.exe file. Right-click the installer and choose .
: Includes clear LEDs to indicate power and GPS signal status. Always verify with official support for the latest
If the installer fails, right-click the "Unknown Device" in Device Manager, select Update Driver , choose Browse my computer for drivers , and select the extracted driver folder. Essential Post-Installation Software
: If the website is unavailable, official listings suggest contacting WhatsApp Support at +91-9358409099 to receive the latest driver file. Installation Process :
90% of Balaji Info Lube Tracker 3.0 devices use the Prolific PL2303 chipset. If the official driver is missing, use the generic Prolific driver: