509e06x02 Exclusive — Din

, this specific size is typically recommended for workpieces with a diameter range of 10mm to 18mm Specification Form E (Single surface) Applicable Diameters Standard Roughness (unless specified otherwise) Why Use an E0.6x0.2 Undercut?

The latest version, , expanded on previous versions (dating back to 1966 and 1998) by adding tolerance values and surface finish recommendations in addition to the dimensional specifications provided by the international standard DIN EN ISO 18388 . Therefore, referring to a part as "DIN 509 Exclusive" suggests that the component adheres to these strict, latest-generation tolerances, which is a mark of high-quality precision.

DIN 509 — E — 06 x 02 │ │ │ │ Standard Form Radius Depth Family Type (0.6mm) (0.2mm) din 509e06x02 exclusive

: Meeting such a high bar for quality and performance inherently addresses safety concerns and regulatory compliance.

Use dedicated turning tools designed for E-type grooves with a corresponding 0.6 mm tip radius. , this specific size is typically recommended for

While the exact features might vary depending on the specific content of the standard, several key aspects could be implied by the term "DIN 509E06X02 Exclusive":

: A relief groove suitable for workpieces where only the cylindrical surface requires subsequent machining (like grinding), and the planar shoulder does not have high fatigue requirements. Standard Surface Roughness: µm, unless otherwise specified on the drawing. Application & Use Cases Tool Clearance: DIN 509 — E — 06 x 02

: Type E undercuts are exclusively used when only the cylindrical surface requires subsequent finish-machining (such as grinding or turning), while the perpendicular shoulder face does not require identical machining.