Skip to content.Skip to navigation
Connect a USB-to-TTL serial adapter to the board’s exposed .
The specific V1.1 revision implements a series of highly efficient Low Dropout (LDO) linear regulators alongside dedicated DC-to-DC buck converters. This sub-circuit converts the standard 12V DC input down to the highly precise internal voltage rails () required by the flash storage, memory layers, and main processing silicon. Key Capabilities and Protocol Support
Jumper wires connected to the board's internal Tx (Transmit), Rx (Receive), and GND (Ground) header pins. The Recovery Process dvbs-evb-kd1100hd-v1.1
A multi-pin header connecting to an external LED/LCD numeric display module, infrared (IR) sensor eye, and physical power/channel buttons. Firmware Maintenance and Software Engineering
While official datasheets for the KD1100HD are difficult to locate (typical of OEM components), we can infer the architecture based on standard DVB-S EVB designs from the mid-2010s. Connect a USB-to-TTL serial adapter to the board’s exposed
| Device / Brand | Hardware ID | Software Version | Firmware Version | Bootloader | Date | |----------------|-------------|------------------|------------------|------------|------| | Gaintec Sat GS 500 | dvbs_evb_kd1100hd_v1.1 | gs_v2.0 | 1_0_1677216_538248472 | 0004 (loader), 0013 (sub) | 08/09/2016 | | S2BOX HD | KD1100HD_v1.1 | SKN_HD_Blue_v2.0 | – | v0004 | 2026 channel list update | | StarTrack 55X HD | dvbs_evb_KD1100HD_V1.1 | SKN_S1_V2.0 | 1_0_16777216_538248472 | 0004 / 0013 / 0001 | 11/08/2016 |
I can provide highly specific next steps depending on the tools you have on hand. Share public link Key Capabilities and Protocol Support Jumper wires connected
Over time, firmware on satellite receivers needs to be updated to patch security vulnerabilities, fix buggy channel scanning, or add support for new streaming codecs. Software modification on the DVBS-EVB-KD1100HD-V1.1 can be achieved via two primary methods: Method A: Standard USB Upgrade
Today, many DVB-S2 and S2X chips have integrated demodulators and smaller packages. Boards like the KD1100HD-V1.1 are now legacy, yet they hold value for: