Ericsson MINI-LINK Command Line Interface (CLI) commands vary by specific node type (such as ), but they generally follow a hierarchy of access modes
Field engineers typically rely on show radio link , show alarms , and write memory as daily commands. For large-scale operations, the CLI is often used in conjunction with Ericsson Network Manager (ENM) or MINI-LINK Manager.
: Displays the current active configuration. ericsson mini link cli commands
The standard, encrypted method for remote management.
: Activates internal or external loops to test signal paths. The standard, encrypted method for remote management
This report covers common CLI command categories for MINI-LINK TN/CN (based on MINI-LINK Manager/Element Manager syntax).
to downgrade your privilege level before closing the session. OSPF routing configuration? Mini-Link CLI | PDF - Scribd to downgrade your privilege level before closing the session
show ip interface # Lists assigned IP addresses and subnet masks show ip route # Displays the local routing table Use code with caution. Assigning a Management IP
Core command categories and representative uses
| Parameter | Meaning | |-----------|---------| | | Received Signal Strength Indicator (dBm) – should be above Rx threshold | | Tx Power | Actual transmit power vs. configured | | Modulation | Current QPSK, 16QAM, 64QAM, 256QAM, 1024QAM | | BER | Bit Error Rate (1e-6 or lower is good) | | MSE | Mean Square Error – quality of demodulation | | ATPC margin | Fade margin remaining when ATPC active |