Evoko Liso Factory Reset Verified Jun 2026

A factory reset returns the Liso to the same state as when it first came out of the box.

The most reliable way to factory reset an Evoko Liso—especially if the screen is unresponsive or locked—is using a bootable USB drive. Step 1: Prepare the USB Drive Insert the USB drive into your computer. Format the drive to . Download the official Evoko Liso firmware package.

Allow the automated scripts to cycle completely uninterrupted. 4. Finalize the Hardware Initialization evoko liso factory reset verified

A firmware reset is the verified solution for several specific scenarios:

Once the service menu appears, navigate using the touchscreen to select or Update Firmware via USB . Confirm the action when prompted. A factory reset returns the Liso to the

: Obtain the latest Liso Device Reset (GZ file) from the Biamp/Evoko Support Portal . Ensure you select the version (e.g., v. 2.x) that matches your Evoko Home installation.

A mismatch between the local time on the Liso and the Evoko Home server will prevent successful SSL handshakes. Ensure your NTP server settings are correct. Format the drive to

To perform a verified factory reset on an , you must use a physical USB reset drive. This process is necessary if you have lost the admin PIN, if the device is not working properly, or if you need to disconnect it from Evoko Home . Required Equipment ("Proper Piece") USB Drive : You need a USB drive with at least 4GB capacity .

: Disconnect the PoE or power cable from the back of the Liso unit. Initiate Flash

While keeping the reset button pressed, plug the PoE cable or DC power adapter back into the device.

Unlike many devices where a hidden pinhole button or cryptic button mash works, the Evoko Liso follows a deliberate, documented sequence: