Slide the drive into the top bay and secure it with mounting screws or a tray.
Standard desktop hard drives require the larger 3.5-inch bays. installing a sata hard drive top
Depending on your case design, mounting will follow one of two methods: Method A: Toolless Drive Trays (Modern Cases) Slide the drive into the top bay and
Look for small, L-shaped 7-pin ports on your motherboard. They are typically stacked in pairs along the bottom-right edge. If you are installing a primary boot drive, plug it into the lowest-numbered port (e.g., SATA_0 or SATA_1). 🔧 Step 3: Physically Mount the Drive They are typically stacked in pairs along the
Ensure both the power and data cables are pushed fully into the drive and motherboard.
If your case uses plastic drive caddies, snap the caddy around the drive ensuring the plastic pins seat into the drive's screw holes, then slide the tray into the rack until it clicks. Step 4: Connect the SATA Data Cable
Right-click on the Windows Start Button and select from the power-user menu. Alternatively, press Windows Key + R , type diskmgmt.msc , and hit Enter. Step 2: Initialize the Disk