The GY-521 MPU6050L is a 6-axis IMU module that provides:
C:\ProgramData\Labcenter Electronics\Proteus 8 Professional\Data\LIBRARY
Integrating the GY-521 MPU6050 with ISIS Proteus: A Complete Simulation Guide isis proteus model library gy 521 mpu6050l upd exclusive
I can provide the specific library files or a sample project. Share public link
: Navigate to the directory where Proteus is installed. It is typically: The GY-521 MPU6050L is a 6-axis IMU module
#include const int MPU_addr = 0x68; // Standard I2C address for GY-521 int16_t AcX, AcY, AcZ, Tmp, GyX, GyY, GyZ; void setup() Wire.begin(); Wire.beginTransmission(MPU_addr); Wire.write(0x6B); // PWR_MGMT_1 register Wire.write(0); // Wake up the MPU-6050 Wire.endTransmission(true); Serial.begin(9600); void loop() Wire.read(); // Read Gyroscope registers GyX = Wire.read() << 8 Use code with caution. Running the Simulation
Resolves common I2C bus hanging or collision bugs found in older user-made models. Without a simulation model, you must upload code
Without a simulation model, you must upload code to a physical MCU and observe serial output or LED behavior. This is slow. With the , you can see the accelerometer and gyroscope values change in real-time as you manipulate a virtual GY-521 on screen.
Right-click the Virtual Terminal component during an active simulation run and select Digital Oscilloscope or Virtual Terminal from the bottom menu to bring it back.
+-----------------------------------------------------------+ | GY-521 BOARD | | | | +---------+ +------------------+ +--------+ | | | VCC |----->| Onboard LDO |----->| VDD | | | | (5V) | | (3.3V Regulator) | | (3.3V) | | | +---------+ +------------------+ +--------+ | | | | +---------+ +------------------+ | | | I2C Bus |----->| MPU6050 Core | | | | SCL/SDA | | (6-DOF Sensor) | | | +---------+ +------------------+ | +-----------------------------------------------------------+ Use code with caution. Key Technical Specifications