Resetting the chip only clears the electronic error. It does not magically empty the saturated pads inside the physical box. Step-by-Step Guide to Resetting the L6170 Maintenance Box
Let's look at the two most practical methods you can use at home.
A: Usually yes – they share the same waste ink system and mainboard architecture. But always check product description.
Is your printer currently , or are you preparing in advance? maintenance box resetter for epson l6170
A maintenance box resetter (or chip resetter) is a small, handheld plastic device with several metal pins.
A maintenance box resetter is a device designed to specifically reset the IC chip located on the . The Epson L6170
Disclaimer: Resetting the waste ink counter does not technically remove the ink from the sponge. Always manage the physical waste to prevent printer damage. If you want, I can: Resetting the chip only clears the electronic error
In most cases, the resetter is a one‑time purchase that can be used repeatedly, or a single‑use chip that replaces the original one. Some resetters are designed to be installed before the maintenance box reaches its 15% capacity warning to prevent the error from ever appearing.
A: No. Wait until it reaches 100% (error 0x9B). Resetting early wastes the remaining sponge capacity.
To safely reset your maintenance box chip, follow this simple process. Step 1: Safety First Turn off your Epson L6170 printer. Unplug the power cable from the wall outlet. Step 2: Remove the Maintenance Box A: Usually yes – they share the same
Some resetters require you to connect a USB cable to a computer and run a small reset utility after the chip is installed. Always follow the instructions provided with your specific resetter.
However, if you print less than 500 pages per year, the original maintenance box will last you 3-5 years. In that case, just buy a new original box when the error appears – you may never need a resetter.
