2.2.0.10 !new! | Neoprogrammer

is a free, feature-packed software for reading, writing, and verifying EEPROM, Flash ROM, and BIOS chips. Version 2.2.0.10 is the latest stable release, offering improved stability, a massive chip database, and support for cheap CH341A programmers.

Users upgrading from older versions will immediately notice a faster read/write cycle. For a 16MB Winbond W25Q128, version 2.2.0.10 completes a verify operation in ~28 seconds vs. ~45 seconds in AsProgrammer.

: Built natively around WCH CH341A dynamic link libraries ( CH341DLL.DLL ). It also bridges with hardware like the USBASP. Chip Adaptability : Services -series EEPROMs, -series SPI Flash chips, and specialized microcontrollers. 🚀 Key Enhancements in Version 2.2.0.10 neoprogrammer 2.2.0.10

In the world of hardware hacking, BIOS recovery, and embedded systems repair, having a reliable, versatile programmer is non-negotiable. While many professional programmers come with proprietary software that is clunky, expensive, or limited, the open-source community has delivered a saving grace: .

Many modern BIOS chips (Dell XPS, MacBooks) run at 1.8V. The CH341A outputs 3.3V. Buy a $5 level shifter (like the 1.8V adapter for CH341A) to avoid frying the chip. is a free, feature-packed software for reading, writing,

[Need help] Reviving bricked Gigabyte B450M-DS3H after bios update

This often happens if the chip is not receiving enough power or if the chip is corrupted. Re-read the chip and compare it to the file. For a 16MB Winbond W25Q128, version 2

For Windows 10/11 – disable Driver Signature Enforcement if needed (Shift + Restart → Disable Driver Signing)

For years, hardware enthusiasts used the stock, proprietary software bundled with cheap Chinese hardware programmers. This older software frequently suffered from poor English translations, unoptimized flashing speeds, and a lack of support for modern 1.8V low-voltage chips.