: The progress bar will turn green as the firmware is written. Once finished, a "Passed" message will appear. Important Notes
The TA-1174 uses firmware packages (not .scatter).
The Nokia 105 TA-1174 flash tool is a reliable solution for fixing software-related issues on your device. By following the steps outlined in this article, you can download and use the flash tool to restore your device to its optimal performance. Always backup your data before attempting to flash your device, and make sure you have the correct firmware file and flash tool version for your device.
| Tool Name | Version Recommended | Best For | |-----------|--------------------|----------| | (RDT) | v5.1904 or newer | Official firmware, full flashing | | Upgrade Download Tool | Latest | Stock ROM update | | Samsung Unisoc Flash Tool | v3.0+ | Alternative UI, same engine | | WriteIMEI Tool (for TA-1174) | 1.0+ | Repair IMEI after flashing | nokia 105 ta-1174 flash tool download
Reliable sources for stock firmware include websites like firmwarefile.com and whatmydevice.com . Look for packages explicitly named for "Nokia 105 TA-1174". Here are some examples of what to look for:
No. The Nokia 105 series are feature phones that do not run the Android operating system. Flashing can only reinstall the phone's proprietary OS, not upgrade it to a different platform.
Flashing firmware can lead to data loss and, if done incorrectly, may damage your phone. This guide is for educational purposes, and you proceed at your own risk. Ensure you are using the correct firmware for your specific TA-1174 variant. : The progress bar will turn green as
Last updated: April 2026
You need three essential files to flash the Nokia 105 (TA-1174). Download them from trusted firmware hosting platforms: 1. MediaTek (MTK) USB Drivers
This model runs on the chipset, so the required tool is SP Flash Tool (Smart Phone Flash Tool), not a Nokia-specific tool. The Nokia 105 TA-1174 flash tool is a
Wait for the progress bar to reach 100% and display a "Write Complete" or "Success" message. Step 5: Finalizing the Process Disconnect the USB cable from the phone. Remove the battery and reinsert it once more.
Allows your Windows PC to communicate with the phone when it is powered off. Recommended Flash Tools for Nokia 105 (TA-1174)
| Issue | Possible Cause(s) | Troubleshooting Steps | | :--- | :--- | :--- | | | Incorrect or missing USB drivers; Wrong boot key combination; Faulty USB cable. | Double-check that the drivers are installed correctly. Try different key combinations like 7 , # , or 7+4 . Use a different USB port or a high-quality data cable. | | Phone is dead after flashing ("bricked") | Interrupted flashing process; Incompatible or corrupted firmware file. | This is a severe issue. Try to flash the phone again using the correct firmware. If detected, some advanced tools like "ATF" have a "Dead Boot Repair" procedure. | | Flashing fails with an error | Using an incorrect firmware for the phone's hardware variant. | Re-verify your phone's processor (Spreadtrum vs. MediaTek) and download the matching firmware. |