Safety must always come first. Never attempt to bypass the overload protection system or ignore a genuine error code. If the recommended solutions do not resolve the fault, or if you encounter a code that is not listed in your manual, contact an authorised PALFINGER partner or a qualified service technician immediately.
If the crane is locked out in a dangerous position due to a faulty sensor, authorized personnel can use the emergency override key or button on the PALTRONIC panel.
Modern Palfinger units may display "W" codes for specific mechanical or configuration warnings: : Rope reserve reached on hoisting winch 2. : Armrest is folded up (operation inhibited). W0057–W0060 palfingercranemanualerrorcodes
When you see an error code on your Palfinger crane:
Below is a categorized table of frequently encountered . Use this as your field reference. Safety must always come first
Pressure transducer on main boom piston side (U230) signal is too high. Check for short circuit in cable. High Signal (U231)
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. If the crane is locked out in a
Velocity calculation unrealistic; replace defective structural encoder. Outriggers Maximum Outrigger Support Force Exceeded.
Troubleshooting Palfinger Crane Error Codes: A Technical Guide
Look for a flashing sequence or a direct digital readout (e.g., "E01" or a specific two-to-four-digit number).