Phison MPALL (Mass Production Tool) is proprietary utility software used by factory technicians to program controllers and map NAND flash memory. The version is a community-modified release. It removes restrictive hardware checks, allowing end-users to flash firmware to corrupted drives or create custom USB configurations. Key Use Cases
Features "Preformat" options to salvage flash drives with bad blocks.
. The "patched" version typically refers to a community-modified release that allows for broader controller compatibility or bypasses certain factory-locked restrictions. Overview of Phison MPALL v3.70.0E Primary Function phison mpall v3700e patched
until the progress bar turns bright green and displays OK . If the box turns red, the configuration file parameters or firmware files are incorrect. Troubleshooting Common Errors "CT - 0x1042" or "Flash Status Error"
| Error Code | Common Meaning | Likely Cause & "Patched" Solution | | :--- | :--- | :--- | | | General USB Command Failure | Poor USB connection, power issue, or software driver conflict. Try a different port, a different computer, or re-run the program as an administrator. | | Error 0x05 | NAND Flash Chip Not Found | The controller cannot communicate with the memory chip. This could be due to a hardware issue (poor soldering) or an improper firmware setup. Double-check the selected Burner and Firmware File names in the configuration. | | Error 0x13 | Firmware Version Mismatch | The Burner and Firmware files selected are not compatible with your specific controller or flash chip. You need to find a different set of binary (.BIN) files. This is a common issue when using a "patched" tool. | | Error 0x1F | Security/Signature Failure | The tool's security check has failed. This is a strong indication that you are using a "patched" or cracked version that is not properly circumventing the controller's security handshake. | | MODE 255 Error | General Failure with Unknown Mode | This is a frustratingly vague error that some users have reported when using v3.70.0E. It seems to be related to configuration corruption and can be difficult to resolve. | Phison MPALL (Mass Production Tool) is proprietary utility
Use or SP Tool (v2.11.00) for simple low‑level format and bad block reset – no patching needed. MPALL is for firmware recovery / factory production, not everyday use.
Select Auto Detect (or manually select if you know your NAND). Preformat: Check this box (Low-level format) 1.2.2. Key Use Cases Features "Preformat" options to salvage
Input custom (Vendor ID) and PID (Product ID) codes if you wish to spoof system properties, or match your original values.
: While optimized for the models above, it also supports a broad range of the PS2251 family, including older chips like PS2231 and PS2251-32 through PS2251-65. Firmware Support