Resetter Printer Canon G2010

Before you can use a software resetter or perform a manual reset, the printer must be in . Turn off the printer (keep it plugged in). Press and hold the Stop button. While holding Stop, press and hold the Power button. Release the Stop button (keep holding Power). Press the Stop button 5 times (some versions require 6). Release the Power button.

Click the button next to it to completely flush the memory values.

Open the bottom panel of the Canon G2010, pull out the ink absorption pads, wash them thoroughly in warm water, dry them completely, and reinstall them. resetter printer canon g2010

Your G2010 will show one of these error messages:

The ink icon should turn off, and the remaining ink count will be reset. Before you can use a software resetter or

Release the Stop button (keep Power held), then press the button 6 times .

Click the button located to the right of the Absorber dropdown. While holding Stop, press and hold the Power button

While effective, using a resetter carries specific risks that users should manage carefully.

If you reset the software counter multiple times without servicing the physical ink pads, the accumulated waste ink will eventually overflow out of the bottom of the printer housing, ruining your furniture and potentially short-circuiting the printer's internal power supply.