Samsung Aj068txj3kg Eu Installation Manual ((new)) -

Connect the mains power supply to terminals L and N on the outdoor terminal block, ensuring the ground wire is securely fastened to the Earth terminal. Communication Wiring (Outdoor to Indoor)

The AJ068TXJ3KG/EU requires unimpeded airflow to discharge heat effectively. Maintain the following minimum clearances around the unit:

Verify delta-T (temperature difference between return and supply air) on all indoor units in both cooling and heating modes. samsung aj068txj3kg eu installation manual

The manual dedicates a significant section to placement, and for good reason. The AJ068TXJ3KG requires specific clearances to function correctly.

Spirit level, core drill (for wall penetrations), leak detection spray or electronic leak detector. 2. Selecting the Installation Location Connect the mains power supply to terminals L

Use a 4-core shielded cable (minimum 1.5 mm²) for each indoor unit channel. Connect terminals 1(L), 2(N), F1, and F2 from the outdoor unit channel directly to the corresponding terminals on the matching indoor unit.

All electrical connections must comply with the electrical diagram pasted on the inside of the unit's service panel cover. Power Supply Specifications 220–240 V, 50 Hz, Single Phase The manual dedicates a significant section to placement,

Before we dive into the wiring and piping, let’s clarify the unit. The model number typically refers to a Samsung Digital Scroll or Inverter Split System outdoor unit (often classified under the DVM S or CAC commercial/hi-wall series). This is a heavy-duty piece of machinery designed for efficiency and performance.

How many are you connecting to this outdoor system?

Screw the flare nut by hand for the first few turns to avoid cross-threading. Use a torque wrench to tighten the nut to the manufacturer-specified torque: 1/4" (6.35 mm) Liquid Line: 14–18 N·m 3/8" (9.52 mm) Gas Line: 34–42 N·m 1/2" (12.70 mm) Gas Line: 49–61 N·m