This site is information about Hentai doujin from Japan.
：双击 sscom5.13.1.exe （中文或英文版）。
: Set an interval (in milliseconds) to automatically repeat the transmission of a specific command.
: Seamlessly switch between Hexadecimal and ASCII display modes. The "Show Time" feature is particularly helpful for timestamping incoming data packets during long-term stability tests. The "English Version" Experience Sscom V5.13.1 English Version
Supports a wide range of baud rates, from standard 300bps up to high-speed 921600bps .
Type AT (for modem) or Hello in the send box. Click (or F5 ). You should see a reply in the receive window. ：双击 sscom5
While tools like PuTTY, Tera Term, or RealTerm exist, SSCOM V5.13.1 remains a preferred choice for hardware developers due to its specific optimization for embedded engineering. Unlike PuTTY, which is designed primarily as an SSH/Telnet terminal, SSCOM focuses purely on hardware interaction. Features like the dedicated HEX panel, real-time CRC generation, and multi-string macro buttons are natively built into its main window, saving developers from digging through complex nested menus. Conclusion
Click (or press F6 ). The status bar should turn green and display "Opened." The "English Version" Experience Supports a wide range
| English Term | 中文释义 | 作用说明 | | --------------------- | -------------------- | ---------------------------- | | | 串口号 / 端口号 | 选择 PC 上物理或虚拟串口编号 | | Baud Rate | 波特率 | 通信速率，须与设备一致 | | Data Bits | 数据位 | 通常为 8 位 | | Stop Bits | 停止位 | 通常为 1 位 | | Parity | 校验位 | None / Odd / Even / Mark / Space | | Flow Control | 流控 | None / Hardware / XON/XOFF | | DTR (Data Terminal Ready) | 数据终端就绪 | 控制信号线输出 | | RTS (Request to Send) | 请求发送 | 控制信号线输出 | | CTS / DSR / RLSD | 信号线状态指示 | 显示设备信号线实时状态 | | ASCII / HEX | 字符模式 / 十六进制 | 显示或发送数据的格式 | | Auto Send / Timed Send | 定时发送 / 自动发送 | 按间隔自动发送数据 | | Send Newline | 加回车换行 | 自动追加 \r\n | | Timestamp | 加时间戳和分包显示 | 每条数据前加时间和分组标识 | | Save Data | 保存数据 | 将接收区数据保存到文件 | | Send File | 发送文件 | 向串口发送文件内容 | | Extension / Multi-String | 扩展 / 多字符串 | 预定义指令列表功能 | | Clear Screen | 清除窗口 | 清空接收区显示内容 |
For standard configurations, use the default industry settings: 8 Stop Bits: 1 Parity: None