전문 심리학자들이 개발한 과학적 IQ 테스트
Upon receiving power, the device will beep, and the LED indicator will flash. V2000-C Programming Guide
Cards can be assigned rapidly in succession or tied directly to individual slot indexes.
Security and simplicity rarely go hand in hand, but standalone RFID access control keypads bridge that gap perfectly. The is a popular, weather-resistant standalone controller used globally to secure commercial buildings, residential gates, server rooms, and private offices.
Before interfacing with the keypad or software, you must understand the physical components of the V2000-c.
The V2000-C RFID access control system is a state-of-the-art access control solution that utilizes RFID (Radio Frequency Identification) technology to grant access to authorized individuals. The system consists of a control panel, RFID readers, and electronic locks. The control panel is the brain of the system, responsible for processing access requests, verifying user credentials, and controlling the locks.
For data security, change the default code immediately upon deployment: Enter Programming Mode ( * + 990101 + # ). Press 0 . Enter your , then press # .
| Parameter | Specification | |:----------|:--------------| | Operating Voltage | DC 12V ±10% | | Unlock Current | ≤1000mA | | Standby Current | ≤60mA | | User Capacity | 1000 standard users | | Read Distance | 5~15cm | | Supported Card Type | EM 125kHz standard card | | Working Temperature | -10°C to 70°C | | Working Humidity | 10% to 90% | | Dimensions | 117 × 117 × 21 mm | | Unlock Relay Rating | 12VDC / 2A | | Alarm Output | 20A max |
The V2000-C RFID access control system consists of the following components:
: If you lose the system password, perform the initialization procedure to restore it to 12345 .
Upon receiving power, the device will beep, and the LED indicator will flash. V2000-C Programming Guide
Cards can be assigned rapidly in succession or tied directly to individual slot indexes.
Security and simplicity rarely go hand in hand, but standalone RFID access control keypads bridge that gap perfectly. The is a popular, weather-resistant standalone controller used globally to secure commercial buildings, residential gates, server rooms, and private offices. V2000-c Rfid Access Control User Manual
Before interfacing with the keypad or software, you must understand the physical components of the V2000-c.
The V2000-C RFID access control system is a state-of-the-art access control solution that utilizes RFID (Radio Frequency Identification) technology to grant access to authorized individuals. The system consists of a control panel, RFID readers, and electronic locks. The control panel is the brain of the system, responsible for processing access requests, verifying user credentials, and controlling the locks. Upon receiving power, the device will beep, and
For data security, change the default code immediately upon deployment: Enter Programming Mode ( * + 990101 + # ). Press 0 . Enter your , then press # .
| Parameter | Specification | |:----------|:--------------| | Operating Voltage | DC 12V ±10% | | Unlock Current | ≤1000mA | | Standby Current | ≤60mA | | User Capacity | 1000 standard users | | Read Distance | 5~15cm | | Supported Card Type | EM 125kHz standard card | | Working Temperature | -10°C to 70°C | | Working Humidity | 10% to 90% | | Dimensions | 117 × 117 × 21 mm | | Unlock Relay Rating | 12VDC / 2A | | Alarm Output | 20A max | The system consists of a control panel, RFID
The V2000-C RFID access control system consists of the following components:
: If you lose the system password, perform the initialization procedure to restore it to 12345 .
