Download and install XC8000 (for XC series) or XDPPro / XDPro (for XD/XL series) from the official Xinje website.
After the driver is active, you must tell the software which port to use. Open and go to the Option menu.
How to Install the Xinje PLC USB Driver: A Complete Step-by-Step Guide xinje plc usb driver install
Navigate to the directory where your Xinje programming software was installed. By default, the driver files are located in one of these paths:
What (if any) do you see in the software or Device Manager? Share public link Download and install XC8000 (for XC series) or
You must be logged into an account with administrative privileges to install hardware drivers. Method 1: Automatic Driver Installation via Software
Method 3: Handling Driver Signature Enforcement (Windows 10/11) How to Install the Xinje PLC USB Driver:
Many Xinje PLC models feature a USB-B port (square printer-style port) for high-speed programming and monitoring. Unlike older serial connections (RS232), USB requires a specific driver to allow the Xinje programming software (e.g., XCP Pro, Xinje PLC Programming Software) to communicate with the PLC.
You should see your device listed cleanly as or "USB Serial Port" , followed by an assigned port number (e.g., COM3 ).
: Modern versions of XDPPro (e.g., v3.7 or v3.8) often bundle the necessary communication drivers, but separate driver files like xnetusb.inf or Silicon Labs Virtual COM Port (VCP) drivers may be required depending on your specific cable. 2. Installing the Xinje Programming Software
Inside the driver folder, locate the execution file, typically named DriverInstall.exe or Setup.exe . Right-click the file and select .