Annoy Tools Cnc Board Manual Pdf Jun 2026

Supports both 2-pin/3-pin 12V/5V lasers with TTL. Annoy Tools CNC Board Wiring Diagram (PDF Guide)

A forum user kindly shared their GRBL parameters for an Annoy Tools board, which you can use as a starting guide:

For detailed information, refer to the Annoy Tools CNC board manual and documentation:

The Annoy Tools CNC board is a microcontroller-based board designed to control CNC machines, such as milling machines, lathes, and engravers. The board is compatible with various CNC software, including Mach3, Mach4, and LinuxCNC. annoy tools cnc board manual pdf

2-pin interface for motor or TTL interface for laser modules. Power Input: Usually a DC 12V-24V power supply. USB Port: For connecting to a computer.

Once you’re connected, you can fine-tune your machine's performance. This is done by sending $$ commands to view and modify settings.

The Annoy Tools CNC control board Go to product viewer dialog for this item. Supports both 2-pin/3-pin 12V/5V lasers with TTL

| MS0 | MS1 | MS2 | Microstep Resolution (A4988) | | --- | --- | --- | ---------------------------- | | 0 | 0 | 0 | Full step (1) | | 1 | 0 | 0 | Half step (2) | | 0 | 1 | 0 | Quarter step (4) | | 1 | 1 | 0 | 1/8 step (8) | | 1 | 1 | 1 | 1/16 step (16) |

The hardware has a few key technical details to be aware of:

Annoy Tools typically utilizes a 3-axis control board based on the GRBL firmware. Most models, like the popular 3018-PRO series boards, feature integrated stepper drivers and a straightforward layout designed for hobbyists. Key components usually found on the board include: Power Input: Usually 12V-24V DC. Stepper Motor Ports: Labeled X, Y, and Z. Spindle Port: For the DC motor or laser module. 2-pin interface for motor or TTL interface for laser modules

Problem: The spindle does not spin or the laser does not fire.

The board features four-pin ports for the X, Y, and Z axes (labeled X-MOTOR, Y-MOTOR, Z-MOTOR).